Products > Car Imaging > IH30-POR002

Together with the Nickl ImageCutter30, the ImageHub30-POR002 is able to put images to the original dashboard display of various vehicles with a MIB2 control unit. The ImageHub30-POR002 gets its signal from the ImageCutter, which has already tailored the signal timing to the needs of the specific car interface. The ImageHub30-POR002 does the physical adaption. For savety purposes, the original image can be displayed alternatively. E.g. safety-relevant information can be displayed at critical situations.

The supply of the very compact Nickl ImageHub30-POR002 comes from the ImageCutter30, easing the integration into the target car.

Transmission of the signals between the ImageCutter30 and the ImageHub30 is done via standard patch cables known from the network technique. By AC coupling, a DC decoupling of the ImageCutter and ImageHub is achieved, allowing potential differences which may be present between the front and the rear area of the wiring harness.
Particular features
  • Multiplexing between original image and PC/Video image
  • DC De-coupling of ImageHub30 and ImageCutter30
  • Obtains supply from ImageCutter30
  • Additional "Alternative Power In" input for a exclusive control unit operation without a ImageCutter30
Order Data: 1EMIH30-POR002

Selected configuration:

Vehicle Display unit
Model: Porsche Macan
Type: E2

Time frame: 2015...
Name: MIB display
Display size: 7"
Resolution: 800 x 480 pxl
Technology: MIB2-High (FPD III)

Cable from ImageCutter to ImageHub:
Cable either from control unit to ImageHub
or from ImageHub to display unit:

In order to put images to an integrated dashboard display, the Nickl ImageCutter30-CD tailores the image geometries and timings to fit the needs of the dashboard display. This signal can then be put to the display interface via th...

FPD-Link II/III cable to loop into a ImageHub between a MIB2 control unit and a MIB2-ABT display e.g. a 7.0" display with 800x480 pixel. The cable has a black 4-pin HSD socket, 180° "straight" for the connection at the display an...

Colored twisted pair with F / UTP foil shield. These cables are used to connect between network devices and a Ethernet Repeater. They are also used for the specific connection of a ImageCutter30 and a ImageHub30. The connectors ar...